Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Flue Liner Replacement: The Northampton Owner’s Guide
An Olympia Chimney flue liner replacement in Northampton typically runs $1,800 to $3,400 installed, depending on liner diameter, height, and whether we’re relining an existing masonry chimney or swapping a damaged section in a prefab system. We stock Olympia Chimney-compatible liners and fittings on the truck, and in most cases Wendell and his crew can complete the job in a single visit. The way most Northampton homeowners discover they need this work is through the camera: a sweep finds cracks, separation at the seams, or a liner that has rusted through from years of condensation and acidic flue gases. Sometimes it shows up as a puff of smoke seeping through brick joints upstairs, or a carbon monoxide detector that keeps tripping for no obvious reason.
Key Takeaways
- Installed Olympia Chimney flue liner replacement in Northampton: $1,800 to $3,400, depending on size and accessibility.
- We stock Olympia Chimney-compatible stainless liners and connectors on the truck for most common sizes.
- You’ll see camera footage of the damage before you spend a dollar on the fix. No exceptions.
- Wendell will tell you plainly if the liner can wait another season. He’s done it plenty of times.
Which Olympia Chimney Models This Applies To
The Olympia Chimney lineup runs from standard stainless chimney liners to insulated systems designed for zero-clearance wood stoves and fireplace inserts. The liner replacement path depends on what you have. If you’ve got a masonry chimney with a clay tile liner that has failed, we commonly swap in an Olympia Chimney flexible stainless liner, sized to the appliance and insulated where code and safety require it. If you’ve got a prefab Olympia chimney system, the liner is often the inner wall of the pipe itself, and the fix is a section replacement rather than a full reline.
One compatibility gotcha worth knowing in Northampton: Olympia Chimney systems are not universally interchangeable with other brands’ fittings, even when the pipe diameter matches. Locking mechanisms and collar tolerances differ. Using a mixed-brand repair can void the manufacturer’s listing and fail inspection. That’s a hard line Wendell won’t cross. When we do the work, we match Olympia to Olympia, or we use a listed, approved equivalent that the inspector will sign off on. If you’re not sure what exact Olympia system you have, look for a data plate on the appliance or a label on the pipe in the attic chase. If you can’t find one, call us and we’ll identify it during the estimate visit.
Signs Your Olympia Chimney Flue Liner Replacement Is Failing
- Condensation stains bleeding through chimney brick or drywall. This one shows up as dark, damp patches on the wall around the chimney chase, often in the upstairs bedrooms. It means hot flue gases are cooling too fast inside a compromised liner and the moisture is wicking outward.
- Flakes of metal or rust at the cleanout door. Open the little metal door at the base of the chimney and run a finger through the debris. If you find wafer-thin rust flakes that look like they peeled off a tin can, the liner is actively corroding from the inside.
- A carbon monoxide detector that trips when the stove or fireplace runs. This is the one we take seriously every single time. Backdrafting or flue gas leakage is exactly what a failing liner causes, and it’s exactly why this repair should not sit on a list for next year.
- Smoke or a faint campfire smell in rooms nowhere near the fireplace. The chimney chase acts like a chimney inside the house when a liner fails. Smoke finds the path of least resistance, and sometimes that path goes right through a gap around an upstairs floor joist.
- Rust staining at the chimney cap or visible cracks in the clay tile during a top-down inspection. This is the visual check Wendell does from the crown looking down. Cracked clay tile is not always an immediate emergency, but combined with rust and flaking it usually means the liner has given up.
Replacement Cost & What’s Included
For a standard Olympia Chimney flexible stainless liner installed in a one-story single-flue masonry chimney in Northampton, you’re looking at $1,800 to $2,600. Two-story runs, insulated liner requirements for a wood stove, or systems with tight offsets push that toward the $2,800 to $3,400 end. Prefab Olympia section replacement depends on how much pipe needs to come out and how accessible the chase is, but most jobs fall between $900 and $2,200.
| Job Scope | Northampton Installed Price |
|---|---|
| Stainless liner, single-story masonry chimney | $1,800 - $2,600 |
| Insulated liner for wood stove, two-story | $2,800 - $3,400 |
| Prefab section swap, accessible chase | $900 - $2,200 |
| Full reline with cap and crown coating | $2,400 - $3,800 |
Every estimate includes the liner, connectors, top plate, cap, and the labor to install and test it. The price Wendell gives you before tools come off the truck is the price on the invoice. The work is covered by our 90-Day Done Right Promise in writing, and if something is not right, one call brings him back at no charge. Standing offers apply too: $40 off any repair over $200, 10% off for seniors and veterans, and no trip charge inside our county.
DIY or Call Us?
Here’s my honest line on this one, because you should hear it straight. You can absolutely check your chimney chase for moisture stains, run a hand through the cleanout debris, and watch for the symptoms above. That’s good ownership. But a flue liner replacement is not a weekend project, and it’s not a job where you want to learn as you go. You’re working at height on a roof, handling stainless steel that wants to spring open like a roll of tape, and making connections that carry carbon monoxide past your family. Get one wrong, and the first sign of trouble is a detector going off at 3 a.m. If it does not need doing, I will tell you. If it does, I will get it done right. Call (484) 859-1367 and we’ll take a look with the camera before we quote anything.
Do You Stock Olympia Chimney Flue Liners on the Truck?
Yes. We carry the common 4-inch through 8-inch Olympia Chimney-compatible flexible liners and connectors on the truck, plus caps and top plates in standard sizes. Specialty diameters or prefab sections for older Olympia models may take a couple of days to source, and we’ll tell you that upfront before the work is scheduled. We also stock and install DuraFlex, HeatShield, and Gelco liner systems when a repair calls for a different approach.
FAQs
A stainless Olympia Chimney liner can last 15 to 25 years in Northampton, but the real number depends on how often the chimney runs, what you burn, and how well the cap and crown have held up against Pennsylvania freeze-thaw cycles. Liners in chimneys that only see a few fires a winter tend to fail faster from condensation than ones that run hot and dry. Call (484) 859-1367 and we’ll give you a realistic read on yours, not a sales pitch.
Sometimes a liner can be patched or resurfaced with a product like HeatShield if the damage is limited to a short section, but a rusted-through or separated Olympia liner usually needs replacement. The camera tells you which path makes sense, and we’ll show you the footage before you spend anything. If repair is the honest call, we’ll quote it that way first.
Most single-flue reline jobs wrap up in four to six hours, including setup, liner drop, connections, and testing. Two-story runs, awkward chases, or crown work can stretch it into a second day. We’ll give you a real arrival window and call if it slips.
No. Top Hat Chimney is an independent, locally owned chimney service in Northampton, Pennsylvania. We install and service Olympia Chimney products because they build a solid liner, but we’re not owned by or connected to the manufacturer. That independence means we recommend what the chimney needs, not what a corporate parent pushes.
The risk in Northampton is harder to see than a roof leak because it happens inside a chase. A failed liner means flue gases and carbon monoxide can move through the house instead of out the top, and every burned fire adds creosote to the mix in ways that can set up a chimney fire. We’re not in the scare business, but this is one repair where the downside of waiting outweighs the savings. Call (484) 859-1367 for a straight answer about your specific chimney.
Get a Straight Answer in Northampton
If you’ve got an Olympia Chimney liner that’s rusting, cracking, or tripping your carbon monoxide detector, call (484) 859-1367. Wendell and his crew serve Northampton and the surrounding communities with upfront pricing, camera evidence on every recommendation, and a 90-Day Done Right Promise in writing. A live person answers the phone around the clock, and it might well be Wendell himself. Estimates are free inside the county, and we’ll give you the honest word even when it means the job can wait.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Northampton and nearby areas.